Products

This remote electronic transformer converts standard 120 volt line-voltage to 12 volts, providing the necessary voltage for powering a MonoRail, Ka...

Snaps on front of MR16 lamp to hold a single lens or louver.

The Suspension Loop from WAC Lighting supplies a 3" electrical loop, which accepts chain hung fixtures up to a maximum of 35 pounds. Dimensions ...

Use to change a low-voltage pendant’s point of suspension to any point on the ceiling. Order one for each pendant.

The Two Circuit Track Conversion or “J” clip from WAC Lighting, locks connector tabls into the two circuit mode.  

The Flexible Track Connector from WAC Lighting, connects two track sections at variable angles from 60 degree to 180 degrees. Can be used as a tra...

The “L” connector from WAC Lighting, is used to join two track sections while making a 90 degree angle turn and can be used to apply power between...

The “L” connector from WAC Lighting, is used to join two track sections while making a 90 degree angle turn and can be used to apply power between...

Used for direct wiring from conduit through the ceiling. The Live End Connector from WAC Lighting supplies power through the end of a track. Dime...

Straight line connector used to join two sections of track. Dimensions: 4.5" L X 1.5" W X .8" H

Used to join three track sections to make a “T” configuration, the T connector from WAC Lighting accepts wires from above the ceiling with knock o...

For use with a “T”-bar drop ceiling installation, the T Bar End Feed from WAC Lighting feeds power to track while concealing the power feed wiring...

The X connector from WAC Lighting connects four track sections at 90 degree and allows a “X” shape to be made. Dimensions 7" L X 7" W X .8" H L...

Canopy mounts to the wall and brings power to the Wall MonoRail run from a single-feed remote transformer (sold separately). The low-voltage leads ...

Canopy mounts to the wall and brings power to the Wall MonoRail run from a single-feed remote transformer (sold separately). The low-voltage leads ...

Adapts almost any FreeJack head to Tech Lighting’s Wall MonoRail system (see element for details). For Wall MonoRail only.

Special Wall MonoRail standoff positions rail 1" from the wall. Order one for every three feet of run and at corners.

Clamps to Wall MonoRail. Telescopes from 9" to 25". Pivots at head to direct beam. Low-voltage, MR16 lamp of up to 75 watts (not included). For Wal...

Wireway cover for use with track suspension kits. Conceals electrical feed wires from the stem of a suspension rod to a track's live end connector...