Track, Monorail & Cable

A classic open “flatback” style, this line voltage track head from WAC Lighting, provides for maximum installation convenience. Dimensions 7 3/...

The Silo X10 LED Line Voltage Track Head- H/J/L Track offers an energy efficient alternative to halogen MR16's as they offer lower wattage with su...

The Silo X20 ACLED Beamshift Track Head by WAC Lighting provides optimal lighting to interior living spaces like kitchens and wet bars while remai...

The 7011 Oculux LED Track Head by WAC Lighting offers soft, direct lighting to interior living areas, usually on a track that accompanies kitchen ...

Designed by WAC Lighting. The 103LED is an energy efficient, line voltage track head using a pre-installed GU10 LED lamp. Fixture is specifically ...

The LEDme Exterminator II 52W Track Head - L Track offers superior light output in a compact, unobtrusive design. The Exterminator II collection w...

This solid die cast aluminum luminaire is a stylish and versatile choice for your spot lighting needs. The yoke and pivoting heads with silicon ho...

The model 763 line voltage track fixture from WAC Lighting, is a front loading gimbal ring, which allows lamp replacement without removing the rin...

Sleek, powerful, and modernly stylish. The Kuzco Lighting Modern LED Single Fixed Track Fixture offers ample directional lighting from above with i...

A classic “edison” style track head provides maximum installation convenience from WAC Lighting, provides for maximum installation convenience. ...

Hardware used to mount turnbuckles and anchors to a brick or cement surface. Pair.

Insulated cable is #10 gauge, tin-plated copper cable sheathed in clear insulation. Use insulated cable where required by local codes or in coastal...

These conductive connectors join sections of rail together end to end at desired sharp horizontal angle. Pair.

Adapts any FreeJack head or pendant to Tech Lighting’s MonoRail system.

Extends 36" from the wall to support and power rail from a remote transformer. Field-cuttable. Includes 4" round canopy and 2" square canopy.

To install a MonoRail system to a vaulted ceiling, add a power vault adapter to each power feed. Installs to the power feed (sold separately) and a...

The "T" connector joins three pieces of MonoRail to form a "T". These connectors are conductive, so you may power the system from any of the runs. ...

For short, straight runs (runs under 20'). Use to secure cables at one end of run (with turnbuckles at other end). Mount to wall or ceiling. 1.5" w...

Stylish satin nickel turnbuckle. Turnbuckles tighten and secure the cables and provide the necessary tension for a clean look. For short, straight ...

Isolating connectors join sections of rail and isolate power feeds from each other. Two common uses are in runs using more than 300w or in runs ove...

This remote electronic transformer converts standard 120 volt line-voltage to 12 volts, providing the necessary voltage for powering a MonoRail, Ka...

This single-feed surface transformer converts standard 120 line-voltage to 12 volts to provide the necessary voltage for powering a Kable Lite low-...

This single-feed flush transformer converts standard 120 line-voltage to 12 volts to provide the necessary voltage for powering a Kable Lite low-vo...

This single-feed surface transformer converts standard 120 line-voltage to 12 volts to provide the necessary voltage for powering a Kable Lite low-...

Conductive connectors join sections of rail together end to end and are included with all MonoRail pieces. Order separately if cutting and rejoinin...

Decorative end caps fit into ends of MonoRail run for a finished look. Pair; order one pair for each end.

End power feeds are generally used to bring power to a MonoRail system when the transformer or canopy cannot be located directly above the run. The...

These conductive connectors join sections of rail together end to end at desired vertical angle. Pair.

This single-feed surface transformer converts standard 120 line-voltage to 12 volts to provide the necessary voltage for powering a MonoRail low-vo...

Adapts almost any FreeJack head to Tech Lighting’s Wall MonoRail system (see element for details). For Wall MonoRail only.

Special Wall MonoRail standoff positions rail 1" from the wall. Order one for every three feet of run and at corners.

The BX Cable Live End Connector from WAC Lighting is adaptable for use with non-metallic sheathed cable with proper connector. Dimensions LBXLE...

Used in conjunction with live end connector, the HCORD from WAC Lighting, allows a section of track to be wired as a portable unit. Ratings: Loc...

Eight foot line volt track from WAC Lighting is available in three popular formats and is easily installed on drywall, plaster, wood or suspended ...

Straight line connector used to join two sections of track. Dimensions: 4.5" L X 1.5" W X .8" H

The Flexible Track Connector from WAC Lighting, connects two track sections at variable angles from 60 degree to 180 degrees. Can be used as a tra...

Used to join three track sections to make a “T” configuration, the 2-circuit T connector from WAC Lighting accepts wires from above the ceiling wi...

Used for direct wiring from conduit through the ceiling. The Live End Connector from WAC Lighting supplies power through the end of a track. Dime...

Used to join three track sections to make a “T” configuration, the T connector from WAC Lighting accepts wires from above the ceiling with knock o...

The “L” connector from WAC Lighting, is used to join two track sections while making a 90 degree angle turn and can be used to apply power between...

The Suspension Loop from WAC Lighting supplies a 3" electrical loop, which accepts chain hung fixtures up to a maximum of 35 pounds. Dimensions ...

The “L” connector from WAC Lighting, is used to join two track sections while making a 90 degree angle turn and can be used to apply power between...

The X connector from WAC Lighting connects four track sections at 90 degree and allows a “X” shape to be made. Dimensions 7" L X 7" W X .8" H L...

The Two Circuit Track Conversion or “J” clip from WAC Lighting, locks connector tabls into the two circuit mode.  

Straight line dead end connector used as a connector where power is not to go through. Dimensions 3.5" L X 1.5" W X .8" H Location Rating: UL L...

Wireway cover for use with track suspension kits. Conceals electrical feed wires from the stem of a suspension rod to a track's live end connector...

For use with a “T”-bar drop ceiling installation, the T Bar End Feed from WAC Lighting feeds power to track while concealing the power feed wiring...

The Kable Lite Slimline Turnbuckles tighten and secure cables while providing the necessary tension for a clean look. For short, straight runs und...