WAC Lighting Two Circuit Track and Components

For use with a “T”-bar drop ceiling installation, the T Bar End Feed from WAC Lighting feeds power to track while concealing the power feed wiring...

Wireway cover for use with track suspension kits. Conceals electrical feed wires from the stem of a suspension rod to a track's live end connector...

Straight line dead end connector used as a connector where power is not to go through. Dimensions 3.5" L X 1.5" W X .8" H Location Rating: UL L...

The Two Circuit Track Conversion or “J” clip from WAC Lighting, locks connector tabls into the two circuit mode.  

The X connector from WAC Lighting connects four track sections at 90 degree and allows a “X” shape to be made. Dimensions 7" L X 7" W X .8" H L...

The “L” connector from WAC Lighting, is used to join two track sections while making a 90 degree angle turn and can be used to apply power between...

The Suspension Loop from WAC Lighting supplies a 3" electrical loop, which accepts chain hung fixtures up to a maximum of 35 pounds. Dimensions ...

The “L” connector from WAC Lighting, is used to join two track sections while making a 90 degree angle turn and can be used to apply power between...

Used to join three track sections to make a “T” configuration, the T connector from WAC Lighting accepts wires from above the ceiling with knock o...

Used for direct wiring from conduit through the ceiling. The Live End Connector from WAC Lighting supplies power through the end of a track. Dime...

Used to join three track sections to make a “T” configuration, the 2-circuit T connector from WAC Lighting accepts wires from above the ceiling wi...

The Flexible Track Connector from WAC Lighting, connects two track sections at variable angles from 60 degree to 180 degrees. Can be used as a tra...

Straight line connector used to join two sections of track. Dimensions: 4.5" L X 1.5" W X .8" H