Track, Monorail & Cable

A classic open “flatback” style, this line voltage track head from WAC Lighting, provides for maximum installation convenience. Dimensions 7 3/...

The Silo X10 LED Line Voltage Track Head- H/J/L Track offers an energy efficient alternative to halogen MR16's as they offer lower wattage with su...

The Silo X20 ACLED Beamshift Track Head by WAC Lighting provides optimal lighting to interior living spaces like kitchens and wet bars while remai...

The 7011 Oculux LED Track Head by WAC Lighting offers soft, direct lighting to interior living areas, usually on a track that accompanies kitchen ...

Designed by WAC Lighting. The 103LED is an energy efficient, line voltage track head using a pre-installed GU10 LED lamp. Fixture is specifically ...

The LEDme Exterminator II 52W Track Head - L Track offers superior light output in a compact, unobtrusive design. The Exterminator II collection w...

This solid die cast aluminum luminaire is a stylish and versatile choice for your spot lighting needs. The yoke and pivoting heads with silicon ho...

The model 763 line voltage track fixture from WAC Lighting, is a front loading gimbal ring, which allows lamp replacement without removing the rin...

A classic “edison” style track head provides maximum installation convenience from WAC Lighting, provides for maximum installation convenience. ...

The BX Cable Live End Connector from WAC Lighting is adaptable for use with non-metallic sheathed cable with proper connector. Dimensions LBXLE...

Used in conjunction with live end connector, the HCORD from WAC Lighting, allows a section of track to be wired as a portable unit. Ratings: Loc...

Eight foot line volt track from WAC Lighting is available in three popular formats and is easily installed on drywall, plaster, wood or suspended ...

Straight line connector used to join two sections of track. Dimensions: 4.5" L X 1.5" W X .8" H

The Flexible Track Connector from WAC Lighting, connects two track sections at variable angles from 60 degree to 180 degrees. Can be used as a tra...

Used to join three track sections to make a “T” configuration, the 2-circuit T connector from WAC Lighting accepts wires from above the ceiling wi...

Used for direct wiring from conduit through the ceiling. The Live End Connector from WAC Lighting supplies power through the end of a track. Dime...

Used to join three track sections to make a “T” configuration, the T connector from WAC Lighting accepts wires from above the ceiling with knock o...

The “L” connector from WAC Lighting, is used to join two track sections while making a 90 degree angle turn and can be used to apply power between...

The Suspension Loop from WAC Lighting supplies a 3" electrical loop, which accepts chain hung fixtures up to a maximum of 35 pounds. Dimensions ...

The “L” connector from WAC Lighting, is used to join two track sections while making a 90 degree angle turn and can be used to apply power between...

The X connector from WAC Lighting connects four track sections at 90 degree and allows a “X” shape to be made. Dimensions 7" L X 7" W X .8" H L...

The Two Circuit Track Conversion or “J” clip from WAC Lighting, locks connector tabls into the two circuit mode.  

Straight line dead end connector used as a connector where power is not to go through. Dimensions 3.5" L X 1.5" W X .8" H Location Rating: UL L...

Wireway cover for use with track suspension kits. Conceals electrical feed wires from the stem of a suspension rod to a track's live end connector...

For use with a “T”-bar drop ceiling installation, the T Bar End Feed from WAC Lighting feeds power to track while concealing the power feed wiring...